WEB OFFSET PRINTING PRESSES

A 1    5 unit Harris V-15-A, 22¾ x 36”  

A 2    4 unit Goss Community w/oil bath units and folder w/quarterfold & Halffold   

A 3    8 unit Color King, 22¾ x 36”, KJ-6 combo folder w/75 HP drive & rollstands. 

          Includes 5’ dryer & 2 roll chillstand for one web 

A 4    4 unit Hantscho Mark VI, 19-3/8 x 33”, 2 web, heatset.   Optional sheeter and 5^th unit   

A 5    4 unit Harris V-25, 22¾ x 36”, JF-10 w/quarterfold & DP, 4 rollstands w/air brakes,

          airshafts, 75 HP motor/drive

A 6    4 unit Process King, 22¾ x 36”, 2 web, splicers, infeeds, IR dryer, KJ-8 folder.   Optional KJ-8 w/DP

A 7    4 unit Process King, 22¾ x 36”, 2 web, heatset with KJ-8 folder and sheeter  

A 8    10 unit Web Leader, 22¾ x 36”, Mark 25, 1994, two 5 unit presses with folders and cross association

A 9    8 unit Apache (V-25), 1998,  21½ x 36”, heatset, 2 web, w/JF-10.  Units have motorized sidelay/circ,

           pneumatics, brush dampening, plate cylinder cocking.  Operated 1 shift for 2 years. Excellent Condition. 

          Two spare units 

          Alternate configuration:  4 web, coldset, with 4 V-25 rollstands.   Optional JF-35 w/quarterfold & DP  

A10  4 unit Hantscho Mark VI, 22¾ x 36”, 1 web, 1980-81, w/RGS-IV, pattern perforator, combination folder

          w/quarterfold & DP, and sheeter.   

A11  4 unit Harris V-25, 22¾ x 36”, 1985, brush dampening,  JF-25 w/quarterfold & double parallel, Enkel splicer 

A12  6 unit Harris M-200, 23-9/16” x 36”, 2 web, QC-4 combination folder with quarterfold

          & double parallel, sheeter

A13  4 High Goss SSC Community.   Units include pneumatics & lever ink keys.  Folder w/quarterfold. 

          60 HP motor and controller   

A14  2 unit Harris V-15-D, 22¾ x 36”, 2 web, new 75 HP Fincor drive, JF-4 or JF-25 folder.   Optional splicers  

A15  8 unit Harris NC-400, 21” x 36”, 2 web, heatset, 2 combo folders with prefolders  

A16  8 unit Hantscho Mark VII, 22¾ x 36”, Perretta ink controls, brush dampening, combo & DFF formers w/stackers 

A17  4 unit Harris V-15-H, 22¾ x 36”, Butler splicers, Harris infeed, JF-4 or JF-25 folder.  Optional heatset pkg. 

A18  2 unit Harris NC-400, 22¾ x 36”, Butler splicers, Harris infeed, JF-4 or JF-25 folder.   Reconditioned print units    

A19  4 unit Harris M-1000A-I, 22¾ x 38”, 1 web, remote ink controls, brush dampening, TC-3 combo folder    

A20  4 unit Harris N-845, 45½ x 36”, 3 web, Butler 4050-16 splicers, heatset or coldset,  RBC-II folder

A21  12 unit Goss Suburban, 22¾ x 36”, with two folders   

A22  8 unit Harris N-900, 42 x 46”, two web.   IN PRODUCTION 

A23  4 unit Hantscho Mark VI-A-1, 22¾ x 38”, 2 web, 45-A combination folder with double parallel

A24  8 unit Mitsubishi L-750-XL, 22.750 x 36”, 2 web, 1987, remote ink controls, brush dampening, combination

          And double former folder          

* PRICE INCLUDES REMOVAL AND LOADING.

                                                       PHOTOS and SPECIFICATIONS AVAILABLE.

ADD-ON UNITS

B 1    Harris M-1000, 22¾ x 38”, Parts Unit   

B 2    Goss SC, 22-3/4 x 35”, Floor and Stacked Units 

B 3    Harris N-845 LH Units, 22¾ x 36”  (4 Available)

B 4    Harris V-15-A, 22-3/4 x 36”

B 5    Harris V-15-D, 21-1/2 x 36”, 1984, motorized circ., pneumatics, brush dampening (4 available)

B 6    Apache, 21½ x 36”, 1998.  Operated 2 years.  Compatible with V-15-D & V-25.  9 units w/motorized

          sidelay & circ, Pneumatics and brush dampening

B 7    Hantscho Mark II, 19-3/8 x 33”, w/motorized circumferential & sidelay (4 Available)

B 8    Goss HV, 21 x 36”  (4 Available) 

B 9    Harris M-1000A-I, 22¾ x 38”, manual ink keys, brush dampening – 2 available  

B10  Harris M-1000A, selectively reconditioned, 22¾ x 38”, brush dampening, 

          6 units available – 2 w/narrow blanket gaps   

B11  Harris V-25, 22¾ x 36” 

B12  Harris NC-400, 22¾ x 36”, 1982  - 3 available (one reconditioned)   

B13  Harris V-15-H, 22¾ x 36”, motorized circ & sidelay top & bottom, pneumatics & brush dampening

B14  Hantscho Mark IV, 23-9/16 x 38”, Dahlgren or Brush Dampening

B15  Hantscho Mark VI, 22¾ x 36”, 3 w/Dahlgren, 2 w/conventional dampening

B16  Harris M-1000A-I, 22¾ x 38”, Perretta ink controls & console, brush dampening. 

B17  Goss Magnum 4-High, 21 x 35”, w/QTI, RGS-IV & 100 HP motor & drive.   Optional dryer   

B18  Goss 4-High SSC Towers, 1991 & newer 

B19  Harris V-30, 22¾ x 36”.    4 Available.   

          Large selection of DC motors,  50 – 200HP,   and Transformers    

          Large selection of M-1000 parts, including new/reconditioned cylinders.

FOLDERS, RIBBON DECKS, PREFOLDERS, SHEETERS

C 1    LAMSON Blowers:  5 HP /  7-1/2 HP  / 10 HP / 15 HP / 20 HP / 30 HP / 50 HP/ 100 HP

C 2    Harris JF-7 Folder, 22¾ x 36”, Quarterfold, 30 HP motor and drive  

C 3    Littleton/Oxy-Dry Sheeter, 22¾ x 40”  

C 4    Goss SC combination folder with quarterfold, 22¾”.   Excellent condition   

C 5    Web Specialties 6-12 ribbon decks, 36” web width x any cut-off, off SSC

C 6    Vertis Ribbon Decks, 21” & 21½” x 36”

C 7    Harris JF-25, 21½ x 36”, with Quarterfold

C 8    Harris JF-10, 21½ x 36”, with Quarterfold

C 9    Cary/Jardis 6-12 Ribbon Deck off 22¾ x 36” Urbanite,  shear slitting, motorized angle bars

          & compensators – single -- double

C10  Hantscho MARK II Combination Folder, 23-9/16 x 38”    

C11  Harris JF-4 Combination Folder, 22¾ x 36”, with Quarterfold and crosshead perf

C12  Harris JF-10 Combination Folder, 22¾ x 36”, Half & Quarterfold  

C13  Hantscho Mark II Combo Folder, 22¾ x 36”, w/DP, crosshead perf & quarterfold    

          Optional connecting parts for Goss Community press

C14  Goss C-150 folder with quarterfold, 21½ x 35” 

C15  Blava Sheeter, 17¾ x 40”, off an M-110  

C16  Hantscho Mark VI sheeter, 23½ x 38”, double web, off an M-1000  

C17  Hantscho MARK IV Double Former Folder, 23-9/16 x 38”,  W-664

C18  Harris 3 Cylinder Combo Folder, 23½ x 38” w/DP

C19  1 Pair WPM angle bar assemblies, 21 or 22¾ x 36”, for tandemizing two single web presses 

C20  Scheffer C1G1 floor mounted prefolder, 22.750 x 38”, with air plows  

C21  Hantscho Mark VI Sheeter, 19-3/8 x 38”

C22  Hantscho MARK VI Combination Folder, 23-9/16 x 38” w/DP

C23  Blava/Vits HS-1800 Sheeter with gap trim, 17¾ x 27”.  Optional 4-8 page module

C24  Goss HV combo folder, 22¾ x 36”, half/quarterfold.  Reconditioned w/moveable former

C25  Blava HS-1800 sheeter, 17¾ x 26½”, with 4 blade around cylinder 

C26  Harris RBC-II collect, non-collect folder, 45½ x 36”, with quarterfolder  

C27  DATM/ILF sheeter, S-1200, 22¾ x 38”, w/4-8 pp module.    Makes flat sheets or 4 pg/8pg sigs.

          Includes silicone applicator, stacker., WPC cut-off control.  Delivers at right angle to operator side.  

C28  Goss SSC folder, 22-3/4” with quarterfold.  Selectively reconditioned

C29  Lovaghy HQF-18 Off-line Quarterfolder, 2005 operated one year, rated at 81,720 CPH   

C30  Hantscho Mark VI Double Former Folder, 22-3/4 x 38”, double web

C31  Harris QC-4 Combination Folder, 23½ x 38”, 2 web, w/DP & ribbon deck (no former) or with former  

C32  Harris Double Former Folder, 23-1/2 x 38”, Selectively Reconditioned

C33  Goss SSC Folder, 21” w/quarterfolder.   Selectively reconditioned 

C34  Harris QC-4 combination folder, 22.776 x 38”, with double parallel 

C35  Harris M-1000 Double Former Folder w/ribbon deck, 23-1/2 X 38” or 23-9/16, Refurbished

C36  Harris 3 Cylinder Combo Folder w/DP, 23-9/16” x 38”.  Selectively Reconditioned

C37  Hantscho MARK VI Combination Folder, 22-3/4 x 38”, double web, w/DP & crosshead perf

C38  Harris Double Former Folder, 22-3/4 x 38”, Selectively Reconditioned

C39  Hantscho 45A combination folder, 22¾ x 38”, with double parallel, two web 

C40  Blava-Vits HS-1800 Sheeter,  22.776 x 38”, 4 blade (45.553 dia. cylinder)

          w/In-line Former w/4 former boards   

C41  Harris TC-3 Combination Folder, 22¾ x 38”, 2 web, with ribbon decks (Optional double parallel)   

C42  Goss C-700 Combination Folder, 21” x 66”  

  *      TIMED BACK PERFORATORS for Hantscho combination folders with crosshead perf

  *      CUSTOM FLOOR OR FOLDER MOUNTED WEB/RIBBON SHIFTERS, made with refurbished angle bars,

           idlers, comps, slitters and air trolleys.

WEB AUXILIARY EQUIPMENT

D 1    Support Products Ink Fountain Levelers (9 available) 

D 2    LINCOLN Ink Tote Pumps – 3 Available, 95 PSI max in / 2250 PSI out  

D 3    AEC Air Coolers for former board blowers  -  650 SCFM & 1200 SCFM 

D 4    AEC Temperature Controller

D 5    2 & 4 Roll Web Guides, Martin, WPC/QTI/WTI, 27”/ 38”, 3 / 4 / 5 web available

D 6    RYCO Model SAFD-38  two sided Silicone Applicator, 26-1/2,  38”,  44”

D 7    Ryco Silicone Applicator, 38”, Double Web

D 8    Hantscho Mark VI Plate Bender, 22¾ x 38”   

D 9    Baldwin 841-HE fountain circulator with heat exchanger for 8 unit press  

D10  Prisco fountain circulator w/5 ton compressor – off an 8 unit press 

D11  Burgess Carlson Plate Bender & Punch for Goss C-250, 21 x 36  

D12  Ternes Auto Plate Bender and Punch, 21”, 21½”, 22¾  x 38”  (3 available) 

D13  WPC Microtrak 9500 Cut-Off Controls, double, off a double former folder

D14  Baldwin cut-off controls, double web, Model 1010 and Model 1020

D15  WPC 4 Roll MICROTRAK 9400 web guides, 38”

D16  Quad-Tech RGS-IV Color Register Control, 38” – 2 singles available  

D17  Baldwin 841-HE Fountain Circulator with heat exchanger

D18  WPC Microtrak 9400 web guides, 38” web width, frameless, for infeeds 

D19  Gregg Pattern Perf, 22.776 x 38” (2 Available)                  

D20  Burgess Auto Plate Bender for Harris N-845, 45½ x 36”  

D21  WPC Color Register Control, 38”, 1992  -  2 singles w/consoles available, S/N 12993 

D22  Harris LH T-23 Infeed, 22¾ x 38”  

D23  Jardis Infeed with web guide, 22.776 x 38”, off Goss SSC  

D24  TecTurn System, w/manifold ducting & blower, 27” & 38”.

D25  Butler Infeed, 22-3/4 x 38”,  Double web  (2 available) 

D26  TEC C-14 Dryer off M-110  

D27  CMS Drytrap Aqueous Coater, Model CM-103, top side, 1994, 22.750 x 38”.

          Requires a double web dryer.   Includes current model Carotron servo drive.

D28  Martin Infeed, 21½ x 38”, double web, with web guides, off a Tensor 

D29  Martin Infeed, 22.750 x 38”, double web, with web guides, off a V-15-D

D30  Harris T-23-U Infeed, 22.750 x 38”, two web, w/optional WPC web guides, can convert to any cutoff 

D31  Graphic Microsystems I remote ink controls for 5 unit Harris M-110.

           Console, junction boxes, 10 ink fountains

D32  Martin Infeed, 22.776 x 38”, 2 or 3 web, with web guides, off a Tensor 4-High press  

D33  Servo Driven INFEED with web guides – 38” web width

D34  SPEC/Jet Web Pattern Perf, 23½ x 38”

D35  WPC Pattern Perf, 22.750 x 38”, 2 around blanket cylinder, motorized circ & sidelay, off  M-1000-B 

D36  Heatset package for 2 web 21½ V-25, Tec C-12 dryer, Harris 3 roll chills, Ryco silicone applicator

D37  Thermo Electron/Megtec Dryers, 11’-6”, 38”, dble web, 1990.  Inc. 2 smoke tunnels & platforms.

D38  TEC C-20 Dryers, double web, two pair available

D39  Hantscho automatic infeed, 22.776 x 38”, 2 web, with WPC web guides  

D40  Megtec 12’ vertical dryer with chillstand for 4-high tower, 36” ww x any cut-off (RH & LH available)

D41  World-Wide UV Coater, bottom side, with Wallace Knight/NordsonDryer, 22.750 x 38”, off an M-1000, 1988,

          includes lineshafting.    Optional servo drive

D42  GMI - II remote ink control system for 5 unit 38” Hantscho Mark VI, either 22-3/4 or 23-9/16”, includes CIP3

D43  GMI-II remote ink control system, 1999, 6 units for Harris M-110. 

          Inc. closed loop color control & segmented blades

         TECTURN SYSTEM W/MOUNTING BRACKETS FOR GOSS 4-HI MAGNUM,

         RH or LH, TEC OR THERMO ELECTRON DRYER

ZERO SPEED SLICERS w / HOIST & Manual Rollstands

E 1    Angle Bar Assembly for installing splicers at right angle, single & double web

E 2    (4) 36” Harris  V-25 Rollstands w/Robertson air brakes & airshafts  

E 3    (1) 38” Martin EC-838 w/electric hoist & right angle assy.  (6 available)     

E 4    (1) 38” Martin EC1638, 50” roll diameter, 1600 FPM

E 5    (2) 38” Martin Model EC-Plus 1540, RH with electric hoist (2 available)  

E 6    (1) 27” Butler w/Datamat controls and hoist.   RH off an M-110  

E 7    (2) 38” Enkel 838 (2 pair available) 

E 8    (1) 38” Butler, Model 4050-12, 50” roll diameter, Datamat controls

E 9    (1) 27” Enkel EC2712, 50” roll diameter, 1998, Excellent Condition  

E10   (2) 38” Martin EC-1038 w/electric hoist  

E11   (3) 50” Butler (1 Pair & 1 LH w/hoist) Model 5042-12 with VG Controls

E12   (2) 38” Butler (1 Pair)  Model 4042-16, RH & LH, with VG Controls

E13   (3) 38” Butler 4000, 50”  -  1 Pair & 1 Single available -                   

E14   (2) 38” Butler (1 Pair)  Model 4042-12, 1983, with VG Controls, 1200 FPM

E15   (1) 38” Butler B38DD J5636RH, w/50” roll diameter, 1500 FPM, 1989   

E16   (2) 38” Martin ECP-1038, tandem pair with hoist.   50” roll diameter     

E17   (2) 38” Butler Model 4042-10 with DVG upgraded controls 

E18   (2) 38” Enkel Model 1045, 1990, very good condition   (50” roll conversion available)

E19   (3) 50” Butler Model 6000, 50” roll diameter, 5000 lb. hoist – 3 single RH available

E20   (1) 38” Butler 6000, 50” roll diameter   

E21   Cary FP-4045 auto pasters, stackable up to 4 high, 1800 FPM, RH or LH models

                                WE CONVERT BUTLER SPLICERS TO 50” ROLL DIAMETER.

SIGNATURE TRIMMERS & GLUING SYSTEMS

F 1    Custom Bilt TK-354 2-knife trimmers – 2 available

F 2    Custom Bilt Trimmer, Model TK-300 

F 3    Harris/Custom-Bilt Model 350 3-knife trimmer  

F 4    A.G.E. 5 knife trimmer, 1996 

        Custom-Bilt 3 or 4 Knife Trimmers available for monthly rental.

PRESS STACKERS

G 1    Stobb PI Brick Stacker                                                                            

G 2    Portec 90 Degree Flow Turn,  excellent condition  

G 3    Baldwin 145 NCS 

G 4    RIMA Bump Turn

G 5    RIMA RS-30 Compensating Stacker  w/Klockner Moeller PLC – 2 available

G 6    RIMA RS-3010-17 Compensating Stacker w/Mitsubishi PLC – 2 available

G 7    Stobb PB Stacker Bundler w/pneumatics.  Reconditioned w/new pneumatic

          actuator w/foot pedal & DC controller

G 8    Stobb PBX Stacker Bundler with Strapper

G 9    Baldwin Model 127 Dual Stream Stacker

G10  Civiemme model 100 stacker bundler

G11  Baldwin Stobb VSB vertical stacker bundler with plastic strappers – 2 available (1 RH/1 LH)

G12  Baldwin DHIL drumless Stacker Bundler with Dynaric Strapper  

G13  (4) NEW High/Low  PI stackers for double former folder

G14  Baldwin DHOL-55 dual stream stacker bundler with strapper – 48” logs    

G15  Civiemme ST-220/40 Vertical Stacker Bundler with strapper, excellent condition 

IN-LINE FINISHING – 26½ & 38” WEB WIDTH:

H 1    Gregg Pattern Perforator, 22.776 x 38”

H 2    Scheffer Pattern Perforator – M-110 

H 3   Blava Patter Gluer, bottom side, 23-1/2” or 23-9/16” x 38”, excellent condition   

H 4   SPEC/Jet Web Pattern Perforator, 23½ x 38”

H 5   WPC Pattern Perforator, 22.750 x 38”, 2 around cylinders, off an M-1000-B

H 6   Ribbon Shifter, 2-In/4-Out, 180 deg., 8 motorized/floppable angle bars, 6 motorized comps,

           infeed/outfeed draw rollers, off 23½ x 38” M-1000-A.  Positions ribbons anywhere/either side up. 

          Can convert size & modify for right angle 

H 7   WPM Rota-Cutter Rotary Cutter, 1995,  45½ x 38”  

H 8   AGM/WPM Pattern Perforator, 22-3/4, 23-1/2, 23-9/16 x 38”, double web, reconditioned

L 1    Lantech shrink wrapper  

L 2    Wohlenberg/Lawson Offline 3 Knife Trimmer   

L 3    52” PACESETTER I FLATCUTTER, 1981  

L 4    RIMA RS-1212 (9-1/4”), 1989, with Townsort 

L 5    McCain10 Pocket S-2100 Saddle Stitcher, 1993-95.   Includes cover feeder,

          forward station for inside inkjetting, 3 knife trimmer, mail table for outside inkjetting,,

          4^th & 5^th knife (not installed).   Disassembled and in storage. 

L 6    Muller Bravo 4 pocket stitcher trimmer with cover feeder & stacker  

L 7    Muller Fox 5 pocket stitcher trimmer 

L 8    Heidelberg ST-270 saddle stitcher, 2001 with 7,269 hours of operation .  8 pockets, 6 TAS

          (standard front feed) & 2 TAL (top load pocket which doubles as cover feeder), all w/signature

          recognition, cover feeder & hand feed station.    Can be demo’d by appointment.    

L 9    Harris EB-150 perfect binder, 22 clamp, 1991,  with Muller w/3670 in-line 3-knife trimmer

          & Muller 3630 binder stacker.   Can be demo’d by appointment.     

L10   Muller Martini C-12/24 Corona Perfect Binder, 26 clamp, 12,000/hour.

           Specs/photos available.  Demo by appt.

AIR COOLED CHILLERS:

J 1     20 ton AEC/Carrier, Model AC-30, 80A027, 30-3-15, 460v/3 phase, self-contained

          (includes tank/pump station)

J 2     40 ton AEC/CARRIER, self contained, including tank/pump station  

J 3     100 ton AEC/CARRIER  

AFTERBURNERS:

K 1   ADWEST 10,000 SCFM RTO, including ducting.   Price excludes removal & loading  

K 2   TEC MAGNUM 4,500 SCFM Catalytic Oxidizer.  Price includes removal & loading  

K 3   AEG/ADWEST 17,500 SCFM RTO, 1995  

EQUIPMENT SUBJECT TO PRIOR SALE. PRICES ARE AS IS/WHERE IS/FOB ORIGIN.

EQUIPMENT WANTED:   

4 – 6 UNIT HARRIS V-15-A, 22¾ x 36”

LH MARTIN INFEED, 22¾ x 38”, DOUBLE WEB

RH MARTIN INFEED, DOUBLE WEB, 21½ & 22¾” x 38”

CUSTOM-BILT 3-KNIFE TRIMMER, MODEL 354, ANY CONDITION

HARRIS JF-35, 21 x 36” with QUARTERFOLD

TEC or THERMO ELECTRON VERTICAL DRYERS with CHILLS

1972-73 HARRIS N-845 LH UNIT, 22¾” x 36”

4000 – 4500 SCFM  RTO

BURGESS AUTO PLATE BENDER for 21” x 46” HARRIS N-900

GOSS SC OR SSC FOLDER, 22¾”, w/DOUBLE PARALLEL & CROSSHEAD PERF

OFFLINE QUARTERFOLDER, CHESIRE or EQUIVALENT